50 Micron Poly Spun Sediment Filter Cartridge - 2.5 x 10
The Hydronix 10" Sediment Filter Cartridge is made with 100% polypropylene, this sediment cartridge is resistant to chemicals and reduces waterborne contaminants like rust, silt, sediment, and sand. This Hydronix water filter has four layers, outside-in flow and step-by-step 50 microns that effectively retain particles while extending the life with a lower pressure drop.
This sediment filter is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters. Made with 100% polypropylene, this filter is resistant to chemicals and reduces waterborne contaminants like sediment, silt, rust, and sand. The graded density of the Hydronix 10" filter cartridge provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges. The operating temperature of this cartridge is 40 degrees to 145 degrees Fahrenheit.
Specifications:
- 50 micron rating
- Dimensions: 2 1/2" x 9 7/8"
- Flow Rate: 0.2 psi @ 5 gpm
- Certified to NSF standard 42
- Replace filter every 6 months
- Fits standard 10" filter housings
- Do not use microbiologically unsafe water
- Surfactant free, binder-free, and adhesive-free
Compatible with the following:
- Aqua-Pure AP-124
- 3M - AP11T, AP101T, FHT-34-S, USO-14-S
- Cuno - NPF-50-975
- Hytrex - 94763
- LiquiTec - SDF-25-1050
- Pentek - 155214, HF-360, PD-50-934
- Purtrex - 93111, 1193111, PX50-9 7/8, PX50-10
- Watts - 304007